How to Replace a UPVC Door Replacement Lock
If the lock on your door is jammed or doesn't function in the way it should, you might need to replace it. It may sound complicated however the procedure is simple and does not require a professional locksmith.
Few basic tools, some patience, and lots of care should be enough. Here's how to do it:
Measure the Door
It could be time to replace your uPVC doors if they are having trouble locking them or they won't shut. If you've recently moved, a tenant has left without returning the keys or your multipoint gear box is showing signs of wear and tear, it's easy to swap out the lock barrel for one that is new and provides an additional layer of security.
Before buying a replacement lock, you'll need to make sure you have key measurements that will ensure the new cylinder is properly fitted and won't affect your home security. The backset is the most important. This is the distance between the middle of your keyhole bore hole to the edge of your door. It's typically 2 3/8 or even 2 3/4 inches. Use a measuring tape or ruler to measure this, and then record the results on a piece of paper or notepad.
You will also need to be aware of what the faceplate's thickness is. This is the thickness of the faceplate that covers the lock mechanism. If you can, buy another lock from the same manufacturer, because they'll be constructed to the same dimensions. If you can't find the manufacturers name or mark, simply measure the width of the current cylinder. replacement lock for upvc door repairmywindowsanddoors can also measure the width of the cylinder by placing a pencil over the keyhole.
Once you have the measurements you need, you can begin removing the old cylinder. Start by loosening the screw that holds the handle in place using a Phillips-head driver, then loosen the screws that connect the handles' exterior and interior to one another. Once these screws are removed, you can take off the barrel screw on the exterior handle. Then remove the cylinder.
If the cylinder has become stuck in the lock, try using some WD-40 or another lubricant to help get it out. It's important not to make it go out in a forceful way - forcible turns could cause damage to the internal gearbox and lead to additional issues with the lock. You may also want to look into upgrading your lock with anti-snap or anti-bump protection, which is more robust against attacks from thieves.
Source the Lock
When purchasing the latest door lock, you should consider a few factors. To ensure the quality and fit make sure you purchase the right sized cylinder from an established manufacturer. You'll also require some essential tools to complete the job, including tape measure, a screwdriver and a rubber mallet.
There are several signs your lock made of upvc is wearing out and must be replaced. The lock could have obvious damage, or the handle may be loose and not fit correctly. If the lock is jamming or not locking at all it's time for a replacement.
Installing the lock correctly is crucial once you've picked the correct one. This will ensure that it locks and works properly. Follow the manufacturer's instructions to fix the new multipoint lock mechanism onto the upvc door panel and to attach the correct handles and faceplates. Test the mechanism by locking the door and unlocking it from the inside and outside. If all looks good then it's time to celebrate your achievement.
A door lock made of upvc might sound daunting however, it's an simple DIY project that can be done without needing a locksmith. By recognizing the indications that your lock is ready to be replaced and having the necessary tools available it's an easy task.
Keep in mind that just like any other moving component the door lock made of upvc could benefit from lubrication to run smoothly. A few sprays of graphite powder can extend their life by preventing excessive friction. Regularly cleaning your door's lock mechanisms with WD-40 as well as a damp cloth can help to keep them in great condition.
Take out the Cylinder
If you're having trouble with your doors made of upvc It could be time to replace the barrel of your lock. This is a simple DIY project that can be done in just several minutes. It's an effective method to ensure the security of your home. This requires you to identify the manufacturer of the lock and then search for an appropriate replacement.
A damaged door lock could be a real hassle and an extremely security risk. Locks on uPVC doors are susceptible to malfunction, and it's important that you maintain them on a regular basis. Experts suggest changing your lock every seven to eight years. However, if your lock is in a state of extreme damage or you're not happy with its performance, it's worth seeking help from an expert.
For uPVC, a simple pin system known as a euro cylinder will be employed in most instances. They are simple to use and seldom break down, but are still vulnerable. In the end it's a good idea to replace your lock's cylinder with a newer model that incorporates anti-snap and anti-bump protection to guard against burglary.
The first step in changing your uPVC lock is to remove the handle and expose the old cylinder. This can be a little difficult because there are often several screws concealed beneath the handles, so make sure you have a screwdriver handy. The next step is to gently pull and wiggle the cylinder until it loosens. When it does you can remove it from its socket.
Once you've sourced an appropriate replacement, it's simply a case of screwing it in and then reverse the removal procedure. Do not overtighten the lock, as this can cause the cylinder inside the door to get stuck and stop working as it should. After everything is back in place, test the uPVC door replacement lock by opening and closing it from both the inside and outside. You should now be able to lock and unlock it using your key! If not, ensure the screws are tightened and try again.
Install the Lock
You'll need to do some research first to make sure the lock you select is appropriate for your door. You'll have to be aware of your faceplate and backset dimensions - the distance between edge of the front door and the center of the handle/cylinder with the lock type to ensure that the new lock fits correctly without compromising security.
Once you've finished this, you're now ready to begin installing the new lock. Ideally, you should prop the door open or secure it so that it doesn't close during the process. To begin, use a Phillips head driver to loosen the screws holding the handle in place. After they've been removed then you'll be able to slide the handle's outer and inner parts apart.
The next step is to take off the old cylinder, which you'll want to do by unscrewing it from its barrel. After removing the cylinder install the new lock. Make sure you follow the instructions that are specific to your model. Once the lock is in place you can test it by opening and shutting the door from both the inside and the outside, and locking and unlocking it from the interior and testing it again.
There are a variety of reasons why you might need to change the locks on your uPVC door. It could be because you recently moved in and you don't have a lock key, or the previous tenant didn't return it or you may need to upgrade to a more secure lock. It shouldn't take more than five minutes to change the lock's cylinder.
Whether your uPVC doors have single-point or multipoint locks, they all have the same basic mechanism. This means that they could be susceptible to issues at times like not being able to close or getting stuck. These issues are caused by weather conditions or wear and tear or simply the use of everyday. Luckily, most of these problems can be fixed by some minor maintenance or the help of a locksmith.